Maintenance of all electric pallet trucks

1. Raise the wheels during the test run so that even if there is a wrong connection, it will not cause danger.

2. When charging the battery, the charging circuit must be completely separated from the chopper, because in addition to affecting the charging of the charger, the overvoltage generated by the charger will also damage the chopper.

3. Pay special attention to the wiring from the battery to the electric control should be arranged in parallel and as short as possible.

4. When the vehicle is operating in a place with harsh working conditions and difficult ventilation, it is recommended to implement forced ventilation on the controller.

5. Do not slow down when turning, drive when the load is high, overload the forklift, drive on sloping, soft ground, etc. The driver should try to avoid these irregular operations during operation.

6. Regularly clean the internal dust of the DC motor and check the carbon brushes and springs.

7. If the electric pallet truck is not used for a long time, the battery should be fully charged and put aside. And keep charging at a frequency of about 1 to 2 months.